 |
THE M-12,
WHEN YOU WANT THE BEST!
|
 |
|
|
|
POWER
OPTIONS:
M12 Multi Use Extractor
|
|
|
At Just Renew It
Industrial Supply we go out of
our way to provide the information other dealers do not
because we want your business to succeed! Just Renew-It!
Business Made Simpl |
M12 POWER OPTIONS.
THE
M-12 EXTRACTOR, WHEN YOU WANT THE BEST!
  Carpet
Mode Using Two
Independent 115V, 20 amp
outlets:
Gives you FULL Pump & Vacuum
power PLUS FULL use of the 2000 watt in line heating system
Carpet Mode Using two 115V, 15
amp outlets:
If you do not have access to any 20 amp outlets
in a customers home of office, you can simply keep the heaters off
in carpet mode. Your pressure pump and vacuum system will work just
fine. If you feel you need hot water, simply fill the solution tank
with hot water from a sink or tub. This will allow your solution to
be fairly hot without the heaters. Having the option to turn the
heaters off allows you to take on jobs that you otherwise would have
to turn down! The M-12 is truly versatile!
Tile / Hard Surface Cleaning Using Two
Independent 20 amp
outlets:
Gives you FULL 1000 PSI Pump &
Twin Vacuum
power but without the heaters. The tile and grout / hard
surface mode does not use the heaters. The water goes through the
heating system to fast in high pressure mode for them to heat up.
You can feed the M-12 from a warm water tap but it is not necessary.
In tile mode you will have to connect a standard, every day garden
hose to the back to automatically and continuously feed the pressure
system with fresh water. You will also have to connect another
garden hose to the pump out fitting (shown in brass on the rear
bottom left of the unit) to automatically pump out your dirty
water.
Note: 1000 PSI pump is fully
adjustable!
Using our converter for maximum
power:
We offer a power converter that will allow you to
run at full power from most homes. For more on the
converter click here. HOW IT WORKS: The converter plugs into a
220V outlet in the customers home or business. Often you can find a
220V outlet in a customers laundry room. Simply unplug their laundry
dryer and plug one of the converters into that outlet. This
converter will convert the powerful 220V to two independent circuit
20 amp outlets. Simply plug both cords of your speedster into this converter and go to work in FULL power mode. This converter make
life very simple. Be aware, not every home has a 220V dryer outlet.
So me homes have been setup to run natural gas laundry dryers and may
not have a 220V plug.
See converter here.
Using A Generator:
For the guaranteed FULL power at any job site
consider a generator. This will give you all the power you need. Be
sure the generator has at least 6000 watts running power, not peek
power. Also you may want to find a generator that provides two
separate outlets that provide 20 amps of power each. Each of these
outlets need to be on its own circuit. That means, each should have
its own breaker. ANOTHER OPTION: If you cant find a generator with
separate 20 amp outlets on it simply get one that has a 220V outlet.
Buy our
converter kit and use that to split up the power. Note: You may
have to change the plug on the 4 prong converter to match your
generator. Most generators have a 4 prong twist lock plug. This kind
of plug can be purchased at any electrical supply store or Home Depo
for around $20. Simply cut off the old plug and attach the new one.
Having a generator means
you will ALWAYS have access to full power.
|
|
All This In One Unit. Talk About Versatility! The
Speedster 1003DX has it ALL! |
|
|
Check Out
Superior
performance – This unit, which
can be used as a hot water carpet /
upholstery extractor or a
high-pressure, high speed hard
surface tile and grout cleaner. It
comes ready to tackle the toughest
jobs, with
two, 2-stage
high-performance vacuum motors.
Its 2” vacuum inlet and float
increases airflow.
Best
Warranty! 
